Hobolite Mini 20W Portable Bi-Color Continuous LED Lighting Kit

The dimensions of the Mini Standard Kit are 9.65in x 3.54in x 5.51in, and it weighs 2.34lbs;
Mini Creator Kit are 11.02in x 7.48in x 3.15in, and it weighs 3.75lbs

Long-press the color temperature adjustment knob and rotate it according to the on-screen prompt to power on. To power off, long-press the color temperature adjustment knob. Rotate the brightness adjustment knob for a range of 1% to 100% brightness. Adjust the color temperature by rotating the color temperature adjustment knob within the range of 2700K to 6500K. For more details, please refer to our instructional video: https://www.youtube.com/watch?v=Y552fjHxHbE

No, Mini cannot be used for that. But the Mini charger does. Because the Mini charger supports fast charging protocols, catering to the fast-charging needs of the majority of smartphones in the market.

Yes, it is possible, but the charging process will be quite slow. This is because the Mini has a higher power output (20W), which exceeds the power output of most power banks commonly available for charging smartphones/PADs. Many power banks typically support charging for smartphones/PADs at 5V/1A to a maximum of 5V/2A. However, the Mini is designed for 9V/2A charging. Therefore, standard power banks may not fully utilize the fast-charging capability of the Mini's built-in charger.

With the Hobolite power adapter, it takes approximately two hours to fully charge the Mini. During charging, the screen brightness can reach its maximum. At the highest lumen, the theoretical duration is around 50 minutes. When paired with our 95WH V-mount DC battery, it can extend the usage for an additional 5 hours.

Due to considerations related to zoom functionality, the lens of the Mini cannot be removed.

7.086in x 7.086in.

Acrylic.

At 60% brightness, it can go through approximately 500 cycles, and at 80% brightness, it's around 300 cycles.

Yes, it can be used continuously while plugged in. It will disconnect the power every 12 hours, and you can simply restart it.

36.4 degrees.

Under normal usage, it should last without issues for 5 years. The typical lifespan of LED light emission is between 30,000 to 100,000 hours.

In the settings page, select Bluetooth - Pairing & Reset options. The Bluetooth of the light will be reset, entering pairing mode for 60 seconds. If the time limit is exceeded, the pairing mode will automatically end. Repeat the above steps to re-pair if necessary.

Within 20 meters.

Simply touch the NFC area on your phone to the "NFC" marked area on the light to prompt the automatic opening of the Hobolite App. (Make sure your phone has downloaded the Hobolite App, Bluetooth is turned on, the product is paired with the app, and all necessary permissions for the Hobolite App are enabled. Afterward, you can control the light with a single touch using NFC.)

The Mini would be insufficient for interviews. Minimun would be our Avant, or even Pro would be better. Also, interviews would generally require 3 lights.